Sam knew that on three decimal spaces would not be enough.
TomZ
Aug 30 2018 at 12:05 am
only not on.
MasterDiver
Aug 30 2018 at 8:35 am
If it doesn’t check to nineteen decimals, it’s not QX!
Zar Belk!
WayneM
Aug 30 2018 at 12:06 am
She’s totally committed
To major independence
But she’s a lady through and through
She gives them quite a battle
All that they can handle
She’ll bruise some
She’ll hurt some too
But oh they love to watch her strut
Oh they do respect her but
They love to watch her strut
Three decimal places? I wasn’t really thinking about it, but that’s only 0.001 inch… when I was writing CNC programs, we usually worked to 5 decimal places (0.00001″) and that was for sheet metal products with 0.25″ tolerance on final assembly.
Swansonic
Aug 30 2018 at 12:50 am
Calculating gait is one thing. Matching the movement – damn-nigh impossible.
Especially for chromed abacus…..
Pete231
Aug 30 2018 at 1:18 am
Computer controlled machines are one thing, but nothing beats home-cookin’….
Peregrine John
Aug 30 2018 at 1:39 am
Toldja.
(Not often I say that, really.)
Punta Gorda
Aug 30 2018 at 3:01 am
Just a reach, but I imagine the mass distribution has a lot to do with it. Mass ratios will dictate how the armatures and moments of inertia interact to maintain stability and locomotion. All the gait gets you is a limit on step increment.
GWB
Aug 30 2018 at 11:46 am
And, recall, that Sam told the machine that it made her ass too big. So mass distribution will assuredly be off. 😉
Bill
Aug 30 2018 at 3:04 am
Hey! Watch that monkeying around!
jdow
Aug 30 2018 at 4:13 am
Women walk one way when going from A to B for business. They walk, er sashay, another way for men. And calculating THAT requires significant prior experience, like growing up imitating mommy when she sashays. There is walking and there is weapons deployment.
{^_-}
eon
Aug 30 2018 at 5:46 am
Also consider that there are always variances in gait depending on terrain, mass, fatigue, and etc. Sam will walk slightly differently on sand, or after just getting out of the truck.
Machines tend to have too much “consistency” in copying organic movement. This works well in factory assembly lines (going back to the Gilbreaths’ time-and-motion studies), but falls short in any situation in which variance is necessary.
Incidentally, this was the very problem that affected the U.S. Army’s “walking truck” project of the 1960s;
Operator fatigue was exacerbated by the fact that the walker, which was controlled by feedback from the operator’s arms and legs, always moved exactly the same way in any movement- which meant that it was often either pulling the operator “up short” or continuing a movement to completion when the operator had stopped, causing overextension of muscles and tendons.
Too much consistency can be as big a problem as not enough.
That wasn’t the purpose of Jo anyway. Her mission is another thing, and that doesn’t require tricking a husband by copying hot wife’s walk. She’s undoubtedly pretty good at it, but that’s not her purpose.
What jdow said above.
TomZ
Aug 30 2018 at 11:39 pm
Based on what society says a ‘hot wife’ is, both may get mad at you for calling Sam a ‘hot wife’.
Just Joe
Aug 30 2018 at 9:09 am
Up by the bus stop and across the street
Open up their windows to take a peek
Y’all she goes walking, rockin’ like a rollin’ stone
GWB
Aug 30 2018 at 10:38 am
I’m betting that as he got close, he could feel the heat coming off Sam, too. 🙂
TomZ
Sam knew that on three decimal spaces would not be enough.
TomZ
only not on.
MasterDiver
If it doesn’t check to nineteen decimals, it’s not QX!
Zar Belk!
WayneM
She’s totally committed
To major independence
But she’s a lady through and through
She gives them quite a battle
All that they can handle
She’ll bruise some
She’ll hurt some too
But oh they love to watch her strut
Oh they do respect her but
They love to watch her strut
https://youtu.be/slq3ljlBfkI
John M.
Three decimal places? I wasn’t really thinking about it, but that’s only 0.001 inch… when I was writing CNC programs, we usually worked to 5 decimal places (0.00001″) and that was for sheet metal products with 0.25″ tolerance on final assembly.
Swansonic
Calculating gait is one thing. Matching the movement – damn-nigh impossible.
Especially for chromed abacus…..
Pete231
Computer controlled machines are one thing, but nothing beats home-cookin’….
Peregrine John
Toldja.
(Not often I say that, really.)
Punta Gorda
Just a reach, but I imagine the mass distribution has a lot to do with it. Mass ratios will dictate how the armatures and moments of inertia interact to maintain stability and locomotion. All the gait gets you is a limit on step increment.
GWB
And, recall, that Sam told the machine that it made her ass too big. So mass distribution will assuredly be off. 😉
Bill
Hey! Watch that monkeying around!
jdow
Women walk one way when going from A to B for business. They walk, er sashay, another way for men. And calculating THAT requires significant prior experience, like growing up imitating mommy when she sashays. There is walking and there is weapons deployment.
{^_-}
eon
Also consider that there are always variances in gait depending on terrain, mass, fatigue, and etc. Sam will walk slightly differently on sand, or after just getting out of the truck.
Machines tend to have too much “consistency” in copying organic movement. This works well in factory assembly lines (going back to the Gilbreaths’ time-and-motion studies), but falls short in any situation in which variance is necessary.
Incidentally, this was the very problem that affected the U.S. Army’s “walking truck” project of the 1960s;
https://en.wikipedia.org/wiki/Walking_truck
Operator fatigue was exacerbated by the fact that the walker, which was controlled by feedback from the operator’s arms and legs, always moved exactly the same way in any movement- which meant that it was often either pulling the operator “up short” or continuing a movement to completion when the operator had stopped, causing overextension of muscles and tendons.
Too much consistency can be as big a problem as not enough.
clear ether
eon
Browncoat
On a side note… Four years ago today…
https://www.facebook.com/181435678560386/photos/a.274422662595020/722940081076607/?type=3&theater
gafling
Just a note … a FacePlant link is of no use to the many of us that do not partake of that ‘service’.
NotYetInACamp
Nice car
cmblake6
That wasn’t the purpose of Jo anyway. Her mission is another thing, and that doesn’t require tricking a husband by copying hot wife’s walk. She’s undoubtedly pretty good at it, but that’s not her purpose.
What jdow said above.
TomZ
Based on what society says a ‘hot wife’ is, both may get mad at you for calling Sam a ‘hot wife’.
Just Joe
Up by the bus stop and across the street
Open up their windows to take a peek
Y’all she goes walking, rockin’ like a rollin’ stone
GWB
I’m betting that as he got close, he could feel the heat coming off Sam, too. 🙂
JTC
What Zed meant:
“They can’t slap a number on this, but I can put a “number” on it right quick!”
Let the ‘bot watch, that’ll get her program going!
JTC
Or maybe not, Jav might have her on remote feed…in fact that may be part of his overall design, the little pre-horndog.
Pamela
Zed needs to call Damon right quick if that is even a remote possibility.
JTC
“…a “remote” possibility.”
Funny, P.
canuck49
Zed, like Hercule Poirot, ‘has an eye for the figure of a receding woman.’
Grunt GI
Hey. Quick question for Mr. Muir
I ordered the Naomi Red level which I think was download goodies only.
Very nice goodies, BTW.
However I don’t recall there being any mail delivered stuff, so how do those of us at the Naomi level get raffle tickets??
Just wondering.
Chris Muir
Sam Level and above only, I’m afraid, Grunt.It’s all linked to the mailed stuff.
Grunt GI
Ahhh, ok…just wondering…